Alphable Case
This is a case for the Alphable PCB, available here
There are 2 case options available:
1. Tilde, a case I designed
2. Boyardee, an open source case that Chronomap designed
**I didn't have time to print these colors before going live, but you can see them in the Laela listing as the green and purple with a black and white accent on the bottom**
Both kits have the following features:
- 3d printed case - Case is printed at 25% cubic infill
- 3d printed thicc plate - Thicc plate is printed at 100% infill
- 8x 50a tadpoles installed
- C3 daughterboard installed
- JST cable installed
- Wheel weights installed
- Heat set inserts installed
- Screws installed
- SKUF feet installed
Disclaimer:
This case will be printed to order and I can print ~1 full case per day M - F
****If you order this case you understand there may be a queue of cases that need to be printed and that your case will not ship out until your case is complete****
****This case is 3D printed and may have minor imperfections/visible layer lines. This will be handled as best possible and no cases with major issues will be sent to customers****